top of page
A Step By Step Guide To
Sound System Calibration
(without breaking your bank account)
mock01 (2).png

A book that provides a step by step guide to Sound System Calibration without having to buy expensive software. Get this book, learn it, follow it and you won't have to pay for a systems engineer to tune your system thereby saving you money by eliminating the need for professional consultation.   

​

Comes with FREE! ready made template files!

HI! SO HOW IS THIS EBOOK GOING TO BENEFIT YOU?

 

You definitely clicked my ad because you are looking for a solution to improve your sound system’s performance RIGHT? Let me guess you are operating a small to medium sized audio system, maybe a small rental company, a bar, or the sound system at your local church. You might be thinking...

 

“hey I invested good money on decent caliber equipment but I or my tech could not seem to make the most out it"

 

Like your system is rated at high loudness levels but you could not raise the volume or level because of feedback, or you find yourself tweaking like crazy to make something sound acceptable.

 

Somewhere at the back of your mind you’re probably thinking that your system could do better. Well you are correct! You just have to understand the physics behind sound behavior and propagation as basis on how to tweak and calibrate your system to perform as best as it can. Too Easy Right? In fact, there are actual software products out in the market that helps you do just that without really having to geek out on the science behind it. Anyway that’s BORING! Right? Feels like you’re back in high school all over again when you try to google stuff out only to find yourself reading more technical jargons. Yeah that’s exactly why software companies like RATIONAL ACOUSTICS, WAVES, and SONARWORKS, (to name a few) came up with their own software to solve your problem. These softwares are AWESOME SOLUTIONS AND GET THE JOB DONE!  And you might have already checked them out but found out that they are rather PRETTY EXPENSIVE.  Thats why you clicked this ad because of the headline that says “Sound System Calibration without breaking your Bank Account”.  Correct?

 

LET ME DELIVER ON THAT PROMISE!!!

 

What if I tell you that I developed a process, or a NINJA HACK! If you will,  which will enable you to calibrate and optimize your sound system just like you would if you’re using these commercial softwares that I’ve mentioned… If you read the book and follow the instructions you will be able to achieve the following results below even if you skip the theoretical parts and jump straight to the step by step process.   

 

​​​

​

  1. SET APPROPRIATE LOUDNESS LEVEL, BECAUSE LOUD DOES NOT MEAN GOOD, IT FACT IT CAUSES DISCOMFORT

  2. OPTIMIZE THE POWER AND COVERAGE OF YOUR SYSTEM SO YOU MAKE THE MOST OUT OF IT

  3. TIME ALIGN YOUR LOUDSPEAKERS TO LESSEN IF NOT ELIMINATE FLUTTER ECHO RESULTING FROM MULTIPLE SPEAKERS

  4. TUNE YOUR SPEAKERS CORRECTLY TO COMPENSATE OR EVEN NEGATE THE EFFECTS OF THE VENUE'S ACOUSTICS

​

I am actually spending on ads to get to you so you can get this  AUDIO NINJA HACK for only $7 and use it legally! YES only $7, Not $1,000, Not $400, Not even $100, BUT FOR JUST ONLY $7. It’s just like you buying this dude a Starbucks Coffee!

 So for $7  you will get a copy of my ebook entitled “A Step by Step Guide to Sound System Calibration without Breaking your Bank Account”.

​

Contents

  • A Digestible Article About The Nature of Sound​ – I consolidated theoretical concepts based on the physics of sound, which combined with my 20 years experience served as the basis and pretext for the process that I developed for sound system calibration. 

  • Hardware and Software Requirements –  A checklist of stuff you will need for this process (which you may already have), If you don’t have them yet you could go to Amazon, Ebay, or Craig’s List​ to get them inexpensively.

  • Optimum Loudspeaker Positioning – A simple practical tip without being too geeky and reckoning with too much technical jargon.

  • How To Set The Proper Loudness Level – A couple of points as to how you can determine the appropriate loudness to any type of venue. 

  • Loudspeaker Time Alignment – The most neglected aspect of sound system setup and optimization, This is probably my biggest epiphany as for most of my students. Very few really understand this. In fact, many practicing sound consultants and installers don’t really know what this is and how to do it.    

  • How To Adjust Frequency Balance to Offset Room Anomalies – So how do we E.Q. a system? Chances are you are just like me back in my early days wherein we E.Q. our systems by “ear” either by talking to a microphone, or playing a bunch of reference music. Arbitrarily making judgement based on our taste if its good, acceptable, or bad. I talked about how that method is flawed and that there is a more accurate way of how to E.Q. a system free from our flawed judgement.

  • How To Create A Calibration Template – I’ll show you how to do this by using a FREE D.A.W. Software LEGALLY, this is the actual NINJA HACK! Not only that I eliminated all the technical and math jargons like computing the speed of sound, factoring in atmospheric pressure, converting Celsius to Fahrenheit,  and all that stuff  “sound engineers” do, You will save potentially a thousand dollars’ worth of software and appointments from a sound consultant.

  • A Step by Step Guide on How To Use The Template​ – And of course, the actual step by step on how to use the template with images and screen shots making it easier to follow the process.

Let me emphasize  the VALUE of the information contained in this Ebook for you? 

Just like what I promised you before you clicked my ad, I’m giving you a solution worth 1,000 for a $7 alternative, which essentially achieves the same results. Let me break down the cost of this service if you're going to HIRE A CONSULTANT as well as if you DO-IT-YOURSELF using commercial software. 

 

  • Sound Consultants charges an average of $100 per appointment, it usually takes about 4 to 5 appointments  to complete a consultation. If you do the math you already saved $500 worth of consultation just by getting this book.  

  • Hiring a System Engineer for a "ONE TIME RETUNE" cost around $200. If you get this book, not only that you would be saving $200, You would be eliminating the need to pay for future RETUNE! If it takes you 5 RETUNES, that alone potentially cost $1000 in VALUE!!!

  • Doing It Yourself by buying Commercial Software.  Alright lets take a look at the price of a couple of commercial softwares.

​

Slide1.png
Slide3.png
Slide2.png

​

As YOU CAN SEE, If you do this yourself using my method you practically save about $1000 in VALUE!!! in exchange for literally the price of a cup of coffee!

​

​

So how is that for a trade off?  What are you waiting for?  Just buy me a cup coffee by Downloading this EBOOK!

A Step By Step Guide To
Sound System Calibration
(without breaking your bank account)
bottom of page